the Fly Clone Project

Screen clips from the old Parker web site.

Specifications
1of2

2of2


And here is the distilled info in plain text format:
PARKER PM -20 - SPECIFICATIONS

BODY
Wood: Quilt Bubinga or Flame Maple top, Mahogany body
Construction: Quilt Bubinga or Flame Maple top, Mahogany body
Finish: Polyurethane
Bridge: Strinng through design
Vibrato System: N/A

NECK
Wood: Mahogany
Neck Design: Solid one piece
Neck-Body Joint: Traditional set-neck
Scale: 25.5'
Number of Frets: 22
Fret Material: Nickel silver
Fret Size: .060" high..090 wide
Fret Board: Ebony
Fretboard Shape: 10-13" conical form
Neck Shape: Width--Regular Thickness--Fat
Finish: Polyurethane
Nut: Black polycarbonate
Nut Width: 1.650
String Spacing: Bridge--2.038 Nut--1.325
Truss Rod: Traditional design
Tuners: Grover 18:1 Ratio

Electronics
Mag Pickups: Parker Stingers -Alnico
Mag. Config: Number--2 Config--HH
Mag. PU Select: 3-way mag pickup selection with push-pull tap
Piezo System: N/A
PreAmp/Mixer: N/A
Other Controls: Mag volume with push/pull coil tap andmag tone with push/pull coil tap
Output: Mono

MISCELLANEOUS
Weight: 7 pounds
Strings: .009"-.042"
Other Features: N/A
Case/Bag: Parker P-Series custom bag

Screen Clips of the available PM20 variations:

This is a screen clip of a conversation that took place on the old forum concerning the "limited run" definition. My Red Bubinga was confirmed by US Music as being such a run, but they could not tell me how many that involved.

I did my best to clean up the image and it is legible, but you need to click on it, then right click, click on view image and maybe click again to get magnification: