Models Now Available
Posted: Mon Apr 04, 2022 4:24 pm
Hi everyone,
We've made some of our models available through our public GitHub repository:
https://github.com/ElectricGuitarInnovationLab/flyclone
A few notes:
* We're still considering this repository to be "In Development" and are actively verifying and tweaking all models for accuracy. We will confirm individual parts when/where possible.
* While there is an obvious allure to 3D-printing these parts, 1) many 3D printers have poor results with regard to tolerances, and 2) while 3D-printing filaments may be strong enough to serve as battery covers, they are commonly not nearly as strong as a machined part.
* These files are being released under an Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) Creative Commons license.
We've made some of our models available through our public GitHub repository:
https://github.com/ElectricGuitarInnovationLab/flyclone
* We're still considering this repository to be "In Development" and are actively verifying and tweaking all models for accuracy. We will confirm individual parts when/where possible.
* While there is an obvious allure to 3D-printing these parts, 1) many 3D printers have poor results with regard to tolerances, and 2) while 3D-printing filaments may be strong enough to serve as battery covers, they are commonly not nearly as strong as a machined part.
* These files are being released under an Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) Creative Commons license.