Page 1 of 1
NiteFly NFV1 electronics - reverting to the original.
Posted: Thu Nov 11, 2021 8:28 pm
by Majadero
Hi!
This is my first post.
I have played Parker NiteFly NFV1 for about a year and would like to revert its electronics to the original wiring.
Has anybody have in archives the photos of the guitar inside?
Or just a schematics? Somehow I can't find it anywhere.
My guitar has been modified by a previous user with the kill switches, also the piezo can be mixed in in mono.
Thanks!
Re: NiteFly NFV1 electronics - reverting to the original.
Posted: Thu Nov 11, 2021 11:17 pm
by vjmanzo
Hi and welcome!
Did you see
this post? Might be a good place to start.
Re: NiteFly NFV1 electronics - reverting to the original.
Posted: Fri Nov 12, 2021 6:57 am
by Majadero
Hi! Thanks, I have seen it - that guitar according to the owner has got "a wiring fault" - so I am not sure I can take it as a point of reference.
Re: NiteFly NFV1 electronics - reverting to the original.
Posted: Fri Nov 12, 2021 8:22 am
by Droptune
Majadero wrote: ↑Fri Nov 12, 2021 6:57 am
Hi! Thanks, I have seen it - that guitar according to the owner has got "a wiring fault" - so I am not sure I can take it as a point of reference.
Hello
@Majadero I am the owner of that NFV1 and I actually am getting it sorted out hopefully next week or the following week! Once I exactly pin down where the fault is I'll be sure to update that wiring diagram I made in that post. I've been waiting on a few small parts so I'm excited to get this sorted finally! There is very little information it seems on the NFV1/NFV2's so once I have mine sorted I'll do my best to make a wiring "summary" post for future owners.
Thanks
Re: NiteFly NFV1 electronics - reverting to the original.
Posted: Fri Nov 12, 2021 8:34 am
by vjmanzo
Droptune wrote: ↑Fri Nov 12, 2021 8:22 am
There is very little information it seems on the NFV1/NFV2's so once I have mine sorted I'll do my best to make a wiring "summary" post for future owners.
Re: NiteFly NFV1 electronics - reverting to the original.
Posted: Fri Nov 12, 2021 8:38 am
by Majadero
Hello @Droptune - thanks, it will help a lot!
I am just making a basic 3 sc wiring right now.
Do you know what was the capacitor value in NFV1?
Re: NiteFly NFV1 electronics - reverting to the original.
Posted: Fri Nov 12, 2021 10:59 am
by drssyoon
Thanks for solving this. Anxiously waiting...
Re: NiteFly NFV1 electronics - reverting to the original.
Posted: Wed Dec 01, 2021 10:53 am
by moreteavicar
Hi, if it helps here's a photo of the wiring from my NFV1 (pre Ghost modification) - its pretty much the same as SSS strat except for the Piezo feed
Re: NiteFly NFV1 electronics - reverting to the original.
Posted: Thu Apr 21, 2022 12:28 pm
by Majadero
Thanks a lot!!!
Re: NiteFly NFV1 electronics - reverting to the original.
Posted: Thu Apr 21, 2022 12:34 pm
by Majadero
moreteavicar wrote: ↑Wed Dec 01, 2021 10:53 am
Hi, if it helps here's a photo of the wiring from my NFV1 (pre Ghost modification) - its pretty much the same as SSS strat except for the Piezo feed
IMG_4964.JPG
Could you tell me what are capacitors values or codes?
Thanks...
