the Fly Clone Project

KenanJ wrote: Mon Oct 14, 2024 12:21 pm But you did mention that the rmc saddles causes de strings to sit higher and thus causing problems with them use ?

In the case of the Belew model; yes. I think Fly bodies of "normal" thickness will allow the bridges be lowered the additional amount to compensate for the slightly taller RMC saddle elements during setup.

KenanJ wrote: Mon Oct 14, 2024 12:21 pm For the second battery I saw a mod to insert 2 battery slots in the cavity cover and free up the 90s battery compartment for the 13 pin out like here.

That's another cool idea. It really comes down to what room you're left with after fitting everything else.

KenanJ wrote: Mon Oct 14, 2024 12:21 pm I also want to add the modified belewish pot form which you made the tutorial on the forum. I found it brilliant btw.

Though I had thought if it years before, credit will always be due to @Augustonian for encouraging me to make one without having figured out how to reproduce the end-of-travel detent in a way convenient to other modders. Though not ideal, it works well enough.

This reminds me: there are some nice detent switch pots on reverb that may fit the bill on future projects.

https://reverb.com/item/78416494?utm_so ... t=78416494